OVERVIEW: This cooling MACHINE has two high quality, low-noise 120mm Lovers, with long-lasting and quiet fluid dynamic bearings.
It features a built-in adjustable thermostat, which is located within the middle of the fan unit, and which turns the Fans on and off automatically.
The fan unit has a in particular-constructed raised air-chamber base that enlarges the realm of airflow, whereas additionally sealing air and preventing vibrations. This base covers over 145 square inches. Please make sure that the highest of your element has a flat space on high that’s at least 14.5″ x 10″. Do Not Be Concerned in case your air vents are smaller (or better) than the air-chamber base — It Is designed to adapt to any size vents.
THE COOLING MACHINE INCLUDES: 1 x dual-120mm (2 Lovers) Megabase fan unit, 1 x adjustable thermostat (built into the casing), 1 x 5 speed power transformer, and printed set up directions. All cooling GADGET parts connect collectively the use of different heavy-accountability Molex fast-connect plugs, which permits the elements to be separated for easy wire-routing.
SETUP: The GADGET comes totally assembled, with all elements installed, wired and ready to go! Simply plug the facility transformer into an AC outlet, and drop the fan unit on top of your receiver’s top air vents.
GUARANTEE: Your pride is assured. You Can return the MACHINE for any reason inside 30 days — Simply contact me (thru Amazon) and I’ll send you a prepaid return transport label. Due To The Fact That starting in 2005, AV Cupboard Cooling has bought over 10,000 cooling programs, and we’re dedicated to great customer service.
GUARANTEE: Your purchase can also be coated by means of a 12 month elements & labor GUARANTEE.
Options:
- This tremendous low-noise dual-120mm fan unit is designed to sit down on your receiver’s high air vents. It has a unique raised air-chamber base, which covers One Hundred Forty Five sq. inches (14.5″ x 10″) of your element’s prime vents. Air is pulled from your component over the full house of this large raised air-chamber base.
- The MACHINE is temperature controlled, by way of a constructed-in thermostat: The Enthusiasts won’t come on unless the world beneath the raised base reaches the temperature you could have set. Then you’re going to really feel a gradual movement of heat air because the Enthusiasts pull it out of your receiver, making a vortex of cooling air that is drawn in in the course of the bottom vents. When the temperature of your receiver cools down beneath the set temperature, the Lovers shut off robotically.
- As Well As, you Keep An Eye On the velocity of the Fanatics, with the multi-pace power controller.
- Recommended fan speeds for this system: The Fanatics (working together) are rated at 13db whereas shifting 50 cubic feet of air per minute at 1/Three pace, or 16db & 72CFM at half pace. With element cooling, slow (and quiet) are the right way to go! Different On Hand speeds: 2/Three velocity = 19db/98CFM, 3/4 speed = 22db/110CFM, full speed = 25db/148CFM.
- The Megabase cooling unit measures 14.5″ wide and 10″ deep. It Is 1-half of” tall, and best requires about 1/4″ of extra space above the top of the Enthusiasts for airflow.
Receiver/Amplifier Megabase Cooling Fanatics with Adjustable Thermostat & Multispeed Keep Watch Over To Be Had Now at Amazon